SIGLENT SDS1000X-E Series User Manual page 223

SDS1000X-E&SDS1000X-U User Manual
and serial number. After finished, press the return softkey to exit the system
information page.
Update
The software version file of the AWG can be updated directly via U-disk. Follow the
steps below:
Insert U-disk with firmware update file (*.ads) to USB host interface on the front
panel of the oscilloscope. Than a message "USB Flash Drive detected!" will
be displayed.
Press Utility →NextPage4/4→ AWG →System →Update.
Expand the U disk directory, Select the firmware file (*.ads), then press the
Press to update, an upgrade progress bar will be display on the interface.
Figure 117 AWG System Information Interface
191
WWW.SIGLENT.COM