SIGLENT SDS1000X-E Series User Manual page 244

SDS1000X-E&SDS1000X-U User Manual
Universal Knob will activate the visual keypad for more precise input.
10. The Set Sweep and Set Stimulus in Vari-level editor are similar to that in the
Simple sweep mode, but they are independently configured and do not affect
each other. These options in Vari-level mode do not have frequency and
amplitude input because they are specified in the spreadsheet. Press Set
Sweep and then set Mode to "Decade", and set Points/dec to 20. The Set
Stimulus remains default setting.
11. Return to Configure menu and press Set Channel. Set DUT Input to "CH1" and
DUT Output 1 to "CH2", and Channel Gain to "Auto".
12. Configuration was done. Return to the root menu and press Run and wait for
the sweep to complete.
Figure 143 Set Vari-level Parameters Menu
Figure 144 Set Sweep Parameters Menu
212
WWW.SIGLENT.COM