Web Server - SIGLENT SDS1000X-E Series User Manual

SDS1000X-E&SDS1000X-U User Manual

Web Server

SDS1000X-E (4-channel) provide the web server function; you can access and
control the oscilloscope using a web browser. Connect the oscilloscope to your LAN
(or WLAN), then type the oscilloscope's IP address in the web browser. The
oscilloscope's web interface is displayed.
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the WebServer softkey on the fourth page of utility function menu to
enter the WEBSERVER menu.
Password: press this softkey to set a new password,

Reset: press this softkey to erase the password.

Save: Setting a new password or erasing the password, then press this

softkey to make the new configure became effective.
Figure 121 Web Server Interface
196
WWW.SIGLENT.COM