SIGLENT SDS1000X-E Series User Manual page 85

SDS1000X-E&SDS1000X-U User Manual
of the sample waveform to reduce the random noise on the input signal and
generate much smoother waveforms on the screen. This is generally used when the
sample rate of the digital converter is higher than the storage rate of the
acquisition memory.
Eres mode can be used on both single- shot and repetitive signals and it does not
slow waveform update. This mode limits the oscilloscope's real- time bandwidth
because it effectively acts like a low- pass filter.
Note: "Average" and "Eres" modes use different averaging methods. The
former uses "Waveform Average" and the latter uses "Dot Average".
53
WWW.SIGLENT.COM