SDS1000X-E&SDS1000X-U User Manual
their default setting. Then return to the Configure menu.
6.
Press Set Channel to enter Set Channel menu. In this example, set DUT Input to
"CH1", and DUT Output 1 to "CH2". Other DUT Output remains "None".
Since we want to maximize measurement dynamic range, set Channel Gain to
"Auto". Then return to the Configure menu.
7.
Configuration was done. Return to root menu and press Run, and wait for the
sweep to complete.
Figure 138 Set Stimulus Menu
Figure 139 Set Channel Menu
Figure 140 Bode Plot Sweep Curve
210
WWW.SIGLENT.COM