SIGLENT SDS1000X-E Series User Manual page 240

SDS1000X-E&SDS1000X-U User Manual
4) Press the Cursors soft key to enter the CURSORS menu. See the chapter
"Cursor" for details.
3. Press the Data softkey to enter the DATA menu. The data menu displays the
configurations of bode plot measurement results.
1) Press the List softkey repeatedly to turn the Bode plot data list on or off.
After turning on the list, press the Scroll soft key and turn the Universal
Knob to select the frequency point, as shown below.
2) Press Save softkey (Recall softkey) to enable the bode plot save (recall)
function. See the chapter "Save and Recall" for details.
Figure 133 DATA Menu
Figure 134 Bode Plot List On
208
WWW.SIGLENT.COM