SIGLENT SDS1000X-E Series User Manual page 232

SDS1000X-E&SDS1000X-U User Manual
1. Press the Utility button on the front panel to enter the UTILITY function menu.
2. Press the Next Page softkey to go to the second page of the UTILITY function
menu.
3. Press the Next Page softkey to go to the third page of the UTILITY function
menu.
4. Press the Do Self Test softkey to enter the SELFTEST function menu.
5. Press the LED Test softkey to enter the keyboard test interface, as the picture
shown below.
6. According to the prompting information displaying on the screen, press the
Single button continually to light the button lights one by one. The first time to
press the Single button, the Run/Stop button displays red, and the second
press the Run/Stop button displays green. Then the other button lights will be
lighted one by one. At last all the lights will be lighted at the same time.
7. Press the Run/Stop button to exit the LED test program.
Figure 124 LED Test
200
WWW.SIGLENT.COM