Configuring Profisafe Via Profibus - Siemens SINAMICS S120 Function Manual

7.4.2.1

Configuring PROFIsafe via PROFIBUS

Topology (network view of the project)
Components participating in F communication via PROFIBUS are basically wired as follows:
Figure 7-16
Configuring PROFIsafe communication using an example with a Siemens F-CU
The next sections describe a configuration of PROFIsafe communication between a
SIMATIC F-CPU and a drive unit. It is helpful to regularly save intermediate states.
Safety Integrated
Function Manual, (FHS), 11/2009, 6SL3097-4AR00-0BP0
Example of a PROFIsafe topology
7.4 Procedure for configuring PROFIsafe communication
Commissioning
147