Siemens SINAMICS S120 Function Manual page 152

Commissioning
7.4 Procedure for configuring PROFIsafe communication
7. Set the PROFIBUS interface under the "Parameter" tab, set the address, and with the
152
"Properties..." button, set the network settings, the transmission rate (e.g. 12 Mbit/s), the
profile (DP) and then acknowledge with "OK". This sets up the master.
Figure 7-23 Setting the PROFIBUS profile
Function Manual, (FHS), 11/2009, 6SL3097-4AR00-0BP0
Safety Integrated