Siemens SINAMICS S120 Function Manual page 11

CAUTION
• As part of routine tests, SINAMICS devices are subject to a voltage test in accordance
• Motors should be connected-up according to the circuit diagram provided, otherwise
Note
When operated in dry areas, SINAMICS devices with three-phase motors conform to the
Low-Voltage Directive 2006/95/EC.
Safety Integrated
Function Manual, (FHS), 11/2009, 6SL3097-4AR00-0BP0
with EN 61800-5-1. Before the voltage test is performed on the electrical equipment of
industrial machines to EN 60204-1:2006, Section 18.4, all connectors of SINAMICS
equipment must be disconnected/unplugged to prevent the equipment from being
damaged.
they can be destroyed.
Preface
11