Siemens SINAMICS S120 Function Manual page 148

Commissioning
7.4 Procedure for configuring PROFIsafe communication
Creating a safety master
1. Create an F-CPU such as CPU 317F-2 and a drive, e.g. a SINAMICS S120 in
Figure 7-17 Creating a new project
2. Create a SIMATIC S300 Station under "Insert".
3. The HW Config tool opens by double-clicking on SIMATIC S300(1), and then on
Figure 7-19 Calling HW Config
148
accordance with the hardware installed.
To do this, start SIMATIC Manager and create a new project.
Figure 7-18 Creating a new station
"Hardware".
Function Manual, (FHS), 11/2009, 6SL3097-4AR00-0BP0
Safety Integrated