Navigating The Terminal Menu; Terminal Menu Window - ADTRAN TRACER 4102 System Manual

Section 5 User Interface Guide
1.

NAVIGATING THE TERMINAL MENU

The TRACER 4102/4202 menu system can be accessed with a VT100 compatible terminal that is
connected to the RS-232 port located on the back of the unit and set to 9600 bits per second, 8 data bits, 1
stop bit, and no parity. Flow control on the serial interface should be configured to
operation. Once a terminal is connected, press <Ctrl + L> to refresh the current screen. If password access
has been enabled, the
E
System Status menu.
All TRACER 4102/4202 systems are shipped factory default with password protection
disabled.

Terminal Menu Window

The TRACER 4102/4202 uses a series of menu pages and a single main menu page to access its many
features. The main menu page (see Figure 1) provides a link to all available configuration/status pages.
After connecting a VT100 terminal to the TRACER 4102/4202, press <Ctrl + L> to redraw
the current screen.
42
message displays at the bottom of the TRACER 4102/4202
P
NTER ASSWORD
Figure 1. Main Menu Screen
© 2004 ADTRAN, Inc.
TRACER 4102/4202 System Manual
for proper
N
ONE
612804202L1-1A