Configuring The Current Output - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

4900002277
Parameter
Apply I/O configuration
Conversion code
1) Based on order configuration.
2) Visibility depends on order options or device settings.
Parameter
Assign current —
output 1 to n
60
Description
Apply parameterization of the
freely configurable I/O module.
Enter the code to change the I/O
configuration.

Configuring the current output

The Current output wizard guides you systematically through all the parameters
that have to be set for configuring the current output.
Navigation
"Setup" menu → Current output
Current output 1 to n
Parameter overview with brief description
Prerequisite
Select process variable
for current output.
User Entry
• No
• Yes
Positive integer
Terminal number
Signal mode
Assign current output 1 to n
Current span
0/4 mA value
20 mA value
Fixed current
Failure mode
Failure current
Description
•
J22 TDLAS Gas Analyzer
Factory Setting
No
1)
—
User Entry Factory Setting
Off —
SpectraSensors, Inc.