Setting The Analyte Type; Selecting The Measurement Calibration; Setting The System Units - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

4900002277
Parameter
Device tag
Parameter
Analyte type
Parameter
Cal select
54
Parameter overview with brief description
Description
Enter the name for the measuring
point.

Setting the analyte type

Sets the analyte type measured by the analyzer.
Navigation
"Setup" menu → Analyte type
Parameter overview with brief description
Description
The analyte measured by the ana-
lyzer.

Selecting the measurement calibration

Select the calibration to be measured for your device.
Navigation
"Setup" menu → Cal select
Parameter overview with brief description
Description
Select the calibration for measure-
ment

Setting the system units

In the System units submenu the units of all the measured values can be set.
Depending on the device version, not all submenus and parameters are
available in every device. The selection can vary depending on the order code.
User Entry
Max. 32 characters, such as
number or special characters
(e.g., @, %, /)
User Entry
—
User Entry
• 1
• 2
• 3
• 4
J22 TDLAS Gas Analyzer
Factory Setting
H O analyzer
2
Factory Setting
H O
2
Factory Setting
1
SpectraSensors, Inc.