Displaying The I/O Configuration - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

J22 TDLAS Gas Analyzer
Parameter
Failure mode
1) Not a Number
Parameter
I/O module 1 to n ter-
minal numbers
I/O module 1 to n infor-
mation
I/O module 1 to n type
SpectraSensors, Inc.
Description
Select measured value output
behavior when a diagnostic mes-
sage occurs via Modbus communi-
cation.
1)
NaN

Displaying the I/O configuration

The I/O configuration submenu guides the user systematically through all the
parameters in which the configuration of the I/O modules is displayed.
Navigation
"Setup" menu → I/O configuration
I/O Communication
Parameter overview with brief description
Description
Shows the terminal numbers used
by the I/O module.
Shows information of the plugged
I/O module.
Shows the I/O module type.
User Entry
—
I/O module 1 to n terminal numbers
I/O module 1 to n information
I/O module 1 to n type
Apply I/O configuration
Conversion code
User Entry
• Not used
• 26-27 (I/O 1)
1)
• 24-25 (I/O 2)
1)
• 22-23 (I/O 3)
• Not plugged
• Invalid
• Not configurable
• Configurable
• Off
• Current output
2)
• Switch output
4900002277
Factory Setting
—
Factory Setting
—
—
—
2)
59