Configuration Management - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

4900002277
Parameter
Switch-off value •
•
Switch-on delay •
•
Switch-off delay •
•
Failure mode —
Invert output —
signal
100
Prerequisite
In the Operat- Enter measured value
ing mode for the switch-off
parameter, the point.
Switch option
is selected.
In the Switch
output func-
tion parame-
ter, the Limit
option is
selected.
The Switch Define delay for the
option is switch-on of status
selected in the output.
Operating
mode parame-
ter.
The Limit
option is
selected in the
Switch output
function
parameter.
The Switch Define delay for the
option is switch-off of status
selected in the output.
Operating
mode parame-
ter.
The Limit
option is
selected in the
Switch output
function
parameter.
Define output behavior
in alarm condition.
Invert the output
signal.

Configuration management

After commissioning, you can save the current device configuration or restore the
previous device configuration.
You can do so using the Configuration management parameter and the related
options found in the Configuration backup submenu.
Description
Signed floating-
point number
0.0 to 100.0 s
0.0 to 100.0 s
•
•
•
•
•
J22 TDLAS Gas Analyzer
User Entry Factory Setting
0 ppmv
0.0 s
0.0 s
Actual status Open
Open
Closed
No No
Yes
SpectraSensors, Inc.