Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual page 70

4900002277
Parameter
Switch-on value •
•
Switch-off value •
•
Switch-on delay •
•
Switch-off delay •
•
Failure mode —
Invert output —
signal
64
Prerequisite
In the Operat- Enter measured value
ing mode for the switch-on
parameter, the point.
Switch option
is selected.
In the Switch
output func-
tion parame-
ter, the Limit
option is
selected.
In the Operat- Enter measured value
ing mode for the switch-off
parameter, the point.
Switch option
is selected.
In the Switch
output func-
tion parame-
ter, the Limit
option is
selected.
The Switch Define delay for the
option is switch-on of status
selected in the output.
Operating
mode parame-
ter.
The Limit
option is
selected in the
Switch output
function
parameter.
The Switch Define delay for the
option is switch-off of status
selected in the output.
Operating
mode parame-
ter.
The Limit
option is
selected in the
Switch output
function
parameter.
Define output behavior
in alarm condition.
Invert the output
signal.
Description
Signed floating-
point number
Signed floating-
point number
0.0 to 100.0 s
0.0 to 100.0 s
•
•
•
•
•
J22 TDLAS Gas Analyzer
User Entry Factory Setting
0 ppmv
0 ppmv
0.0 s
0.0 s
Actual status Open
Open
Closed
No No
Yes
SpectraSensors, Inc.