Advanced Settings - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

4900002277
Parameter
Value 3 display A local display is
provided.
0% bargraph A selection was
value 3 made in the Value 3
display parameter.
100% bargraph A selection was
value 3 made in the Value 3
display parameter.
Value 4 display A local display is
provided.

Advanced Settings

68
Prerequisite
Select the measured
value that is shown on
the local display.
Enter 0% value for bar
graph display.
Enter 100% value for
bar graph display.
Select the measured
value that is shown on
the local display.
The Advanced setup submenu together with its submenus contains parameters
for specific settings.
Navigation to the "Advanced setup" submenu
Description
For the picklist,
see the Value 2
display parameter
Signed floating-
point number
Signed floating-
point number
For the picklist,
see the Value 2
display parameter
J22 TDLAS Gas Analyzer
User Entry Factory Setting
Cell gas pressure
700 mbar a
1700 mbar a
Cell gas temperature
SpectraSensors, Inc.
A0029564-EN-SSI