Configuring The Switch Output - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

4900002277
Parameter
Operating mode —
Terminal number —
62

Configuring the switch output

The switch output wizard guides you systematically through all the parameters
that can be set for configuring the selected output type.
Navigation
"Setup" menu → switch output
Switch output 1 to n
Parameter overview with brief description
Prerequisite
Define the output as a
switch output.
Shows the terminal
numbers used by the
S output module.
Operating mode
Terminal number
Signal mode
Switch output function
Assign diagnostic behavior
Assign limit
Assign status
Switch-on value
Switch-off value
Switch-on delay
Switch-off delay
Failure mode
Invert output signal
Description
Switch
•
•
•
J22 TDLAS Gas Analyzer
User Entry Factory Setting
Switch
Not used —
24-25 (I/O 2)
22-23 (I/O 3)
SpectraSensors, Inc.