Setting The Dew Point - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

4900002277
Parameter
Date/time format
Parameter
Dew pt method 1 —
Dew pt method 2 —
Conversion type Used if Dew pt is
enabled by select-
ing a method
above.
Pipeline press. Used if Dew pt is
enabled by select-
ing a method
above.
56
Description
Sets the display unit for Date/time
format.

Setting the dew point

The dew point submenu configures parameters needed to perform a moisture dew
point calculation.
Navigation
"Setup" menu → Dew point
Dew point
Parameter overview with brief description
Prerequisite
Sets the method used to cal-
culate dew point tempera-
ture.
Sets the method used to cal-
culate dew point tempera-
ture.
Sets conversion type used to
calculate dew point tem-
perature.
Sets the pressure at which
the dew point temperature
is calculated.
User Entry
Unit Choose list
Dew pt method 1
Dew pt method 2
Conversion type
Pipeline press.
Description
•
•
•
•
•
•
•
•
•
Floating point
number
J22 TDLAS Gas Analyzer
Factory Setting
• dd.mm.yy
hh:mm
• mm/dd/yy
hh:mm am/pm
User Entry Factory Setting
ASTM1 ASTM2
ASTM2
AB
ASTM1 Off
ASTM2
AB
Ideal Ideal
Real
• 50000 mbar a
• 725 psi a
SpectraSensors, Inc.