Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual page 102

4900002277
Parameter
Assign current —
output 1 to n
Terminal number —
Current span —
Signal mode —
96
Navigation
"Setup" menu → Current output
Current output 1 to n
Parameter overview with brief description
Prerequisite
Select process variable
for current output.
Shows the terminal
numbers used by the
current output module.
Select current range
for process value out-
put and upper/lower
level for alarm signal.
Select the signal mode
for the current output.
Terminal number
Signal mode
Assign current output 1 to n
Current span
0/4 mA value
20 mA value
Fixed current
Failure mode
Failure current
Description
•
•
•
•
•
•
•
•
•
•
•
J22 TDLAS Gas Analyzer
User Entry Factory Setting
Off —
Not used —
24-25 (I/O 2)
22-23 (I/O 3)
4...20 mA Approval specific:
NAMUR • 4...20 mA NAMUR
4...20 mA US • 4...20 mA US
4...20 mA
0...20 mA
Fixed current
Passive Passive
Active
SpectraSensors, Inc.