Carrying Out A Sensor Adjustment - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

4900002277
Parameter
Analyte type
Cal select
Rolling avg num
Parameter
Conc. adjust —
Conc. multiplier Used if Concentra-
tion Adjust is
enabled.
70
Parameter overview with brief description
Description
The analyte measured by the analy-
zer.
Changes and sets the calibration
Sets the number of measurements
included in the running average.

Carrying out a sensor adjustment

The sensor adjustment submenu contains parameters that pertain to the
functionality of the sensor.
Navigation
"Setup" menu → Advanced setup → Sensor adjustment
Sensor adjustment
Parameter overview with brief description
Prerequisite
Enables or disables
adjustment factors.
Slope adjustment fac-
tor.
User Entry
—
• 1
• 2
• 3
• 4
Positive integer
Conc. adjust
Conc. multiplier
Conc. offset
Base crv source
Base RT update
Calibration 1 to n
Description
•
•
Signed floating
point number
J22 TDLAS Gas Analyzer
Factory Setting
H O
2
1
4
Selection Factory Setting
On Off
Off
1.0
SpectraSensors, Inc.
→  71