Setting Peak Tracking; Configuring The Communication Interface - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

J22 TDLAS Gas Analyzer
Parameter
Analyzer control —
Reset Used if peak track-
ing is set above.
Average number Used if peak track-
ing is set above.
SpectraSensors, Inc.

Setting peak tracking

The peak tracking submenu controls the software utility to keep the absorption
peak at a known location.
Navigation
"Setup" menu → Peak Tracking
Dew point
Parameter overview with brief description
Prerequisite
Sets peak tracking
capability to OFF or
ON.
Resets peak tracking.
Sets number of mea-
surements before
making a peak track-
ing adjustment.

Configuring the communication interface

The Communication submenu guides you systematically through all the
parameters that have to be configured for selecting and setting the
communication interface.
Analyzer control
Reset
Average number
Description
•
•
•
•
•
User Entry Factory Setting
Off Off
On
Off Off
Reset
Positive inte- 10
ger
4900002277
57