Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual page 125

J22 TDLAS Gas Analyzer
Diagnostic
Short Text
Number
110 Peak track adjust-
ment exceeded
111 Peak track adjust-
ment warning
Diagnostic of electronic
201 Device failure
242 Software incompatible
252 Modules incompatible
262 Sensor electronic
connection faulty
270 Main electronic failure Change main electronic module.
271 Main electronic failure
272 Main electronic failure
273 Main electronic failure Change electronic.
275 I/O module 1 to n
defective
276 I/O module 1 to n
faulty
283 Memory content
300 Sensor electronics
(ISEM) faulty
SpectraSensors, Inc.
Remedy Instructions
Check process.
1.
Check spectrum.
2.
Reset peak tracking.
3.
Check process.
1.
Check spectrum.
2.
Reset peak tracking.
3.
Restart device.
1.
Contact service.
2.
Check software.
1.
Flash or change main electronics
2.
module.
Check electronic modules.
1.
Change electronic modules.
2.
Check or replace connection cable
1.
between sensor electronic module
(ISEM) and main electronics.
Check or replace ISEM or main elec-
2.
tronics.
Restart device.
1.
Change main electronic module.
2.
Restart device.
1.
Contact service.
2.
Change I/O module.
Restart device.
1.
Change I/O module.
2.
Reset device.
1.
Contact service.
2.
Restart device.
1.
Replace sensor electronics.
2.
4900002277
Diagnostic
Status Signal
Behavior
(from factory)
(from factory)
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
F Alarm
119