Configuring The Relay Output - Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual

J22 TDLAS Gas Analyzer
Parameter
Relay output —
function
Terminal number —
Assign limit In the Relay output
function parameter,
the Limit option is
selected.
SpectraSensors, Inc.

Configuring the relay output

The Relay output wizard guides the user systematically through all the
parameters that have to be set for configuring the relay output.
Navigation
"Setup" menu → Relay output 1 to n
Relay output 1 to n
Parameter overview with brief description
Prerequisite
Select the function for
the relay output.
Shows the terminal
numbers used by the
relay output module.
Select process variable
for limit function.
Relay output function
Terminal number
Assign limit
Assign diagnostic behavior
Assign status
Switch-off value
Switch-off delay
Switch-on value
Switch-on delay
Failure mode
Description
•
•
•
•
•
•
•
Concentration
User Entry Factory Setting
Closed Diagnostic behavior
Open
Diagnostic
behavior
Limit
Not used —
24-25 (I/O 2)
22-23 (I/O 3)
Off
4900002277
65