Endress+Hauser SpectraSensors J22 TDLAS Operating Instructions Manual page 87

J22 TDLAS Gas Analyzer
Parameter
Current output 1 —
to n simulation
Value current out- In the Current out-
put 1 to n put 1 to n simula-
tion parameter, the
On option is
selected.
Switch output sim- In the Operating
ulation 1 to n mode parameter,
the Switch option is
selected.
SpectraSensors, Inc.
Navigation
"Diagnostics" menu → Simulation
Simulation
Parameter overview with brief description
Prerequisite
Switch the simulation
of the current output
on and off.
Enter the current value
for simulation.
Switch the simulation
of the switch output on
and off.
Value current input 1 to n
Current output 1 to n simulation
Value current output 1 to n
Switch output simulation 1 to n
Switch status 1 to n
Relay output 1 to n simulation
Switch status 1 to n
Device alarm simulation
Diagnostic event category
Diagnostic event simulation
Description
•
•
3.59 to 22.5 mA
•
•
User Entry Factory Setting
Off Off
On
3.59 mA
Off Off
On
4900002277
81