Repair And Service; Overhaul; Storage / Disposal; Storage - EBARA EV-SA20 Instruction Manual

6.6 Repair and Service

If any abnormal symptoms other than those displayed on the operational panel appear, take action in
accordance with the instruction of Section 9. "troubleshooting".
If trouble occurs, to order repairs or servicing. Please contact EBARA CORPORATION or an
authorized Agent/Distributor, and provide the information on the nameplate and details of the problem.
Please contact EBARA.

6.7 Overhaul

Overhaul is performed in EBARA.
Contact EBARA Sales office or Overhaul service center.
The Ebara EV-SA20 pump may require periodic overhaul based on the application. Overhauls should
only be completed utilizing Ebara factory trained personnel. Please contact Ebara for information on
how to return your pump.

7. Storage / Disposal

7.1 Storage

If the pump is not used for a long period, proceed as following to store the pump.
(1) Replace all gases inside the pump by purging them with dry Air or N2 gas.
(2) Seal off the inlet and outlet ports of the pump with blind flanges.
(3) Store the pump in a dry and clean place.

7.2 Disposal

To disposal the unit, follow effective laws and ordinances applicable in the area where the unit is installed.
If you have any inquiries about the pump, please contact EBARA.
PM10U
Temperature : 5 to 40 deg C
Humidity : 80% or less (condensation must not exist)
P.51
EBARA
CORPORATION