Troubleshooting - EBARA EV-SA20 Instruction Manual

P.54

9. Troubleshooting

DANGER
Be sure to keep the power supply to the pump turned off until you have finished the wiring
and connecting work. Also remove the power connector and interrupt the Circuit Protector
(CP) during this.
WARNING
The pump and exhaust piping will remain at a high temperature during operation and for a
short time after the pump has stopped. Be sure to avoid contact and keep inflammable
substances out of reach. Do not remove the outer cover during operation.
CAUTION
Be sure to check for leaks after you have installed and maintenance the pump.
PM10U
EBARA
CORPORATION