Connecting To A Pc - GRAPHTEC GLT400 User Manual

2.14 Connecting to a PC

Use the USB or LAN Interface to connect the GLT400 to a PC.
Connection Using a USB Cable
(1) Connect between the GLT400 and PC with the USB cable.
The USB connector is adjacent to the LAN connector. Make sure the cable is inserted into the correct
connector.
When connecting with the USB cable, the USB driver must be installed in the PC. For details on how to
install, refer to the "USB Driver Installation Manual".
● Use the cable with A-type and B-type connectors to connect the GLT400 to a PC.
A connector
USB cable
B connector
CHAPTER 2 Checks and Preparation
2-31