Table of Contents
Advertisement
WEB Server Settings
Set the settings to make the GLT400 function as a WEB server.
If you want to connect with HTTPS with your own digital signature certificate/encryption certificate, please
contact us.
(6)
(1) Port Number
(2) Basic authentication
(3) User name
(4) Password
(5) Encryption (https)
(6) Apply settings
When your own digital signature certificate has not been installed, a self-signed certificate is output.
Please use it after acknowledging.
(1)
(2)
(3)
(4)
(5)
Enter the port number used for the WEB server. Usually the port number is 80. (0 to 65535)
When connecting to the WEB server, you can restrict it by user name and password.
Off: Basic authentication is disabled.
On: Basic authentication is enabled. The access is restricted with user name and password.
Enter the user name of basic authentication. (Up to 31 characters) User name is "GLT400" by
default.
Enter the password of basic authentication. (Up to 31 characters) Password is "GLT400" by default.
The communication information is encrypted in the WEB server. By default, the connection
is established with the self-signed certificate installed in advance, so some warnings may be
displayed. If you want to use your own certificate, please contact us.
The settings are applied to the GLT400.
CHAPTER 4 Settings and Measurement
Description
4-41
Advertisement
Table of Contents
