Buzzer - GRAPHTEC GLT400 User Manual

CHAPTER 3 Operation and Function

3.4 Buzzer

This section describes the buzzer operation. For the buzzer sound, refer to "3.5 Description of Operation
Mode".
The buzzer sound can be turned off in the settings. For the buzzer sound settings, refer to "Chapter 4
Settings and Measurement (6) OTHER Settings (6)-1 Buzzer".
(1) Key click sound
The buzzer sounds immediately when the single press key is performed and sounds when the long press is
performed and it is confirmed.
Status
When clicking the key
(2) Start/stop capturing
These are buzzer sounds when capturing starts and stops.
Status
Capturing started
Capturing stopped
Capturing start failed
(3) When an error occurs
This is a buzzer sound when an error or warning occurs.
Status
Error occurred
Warning occurred
(4) Replacement of SD CARD
When the SD CARD is replaced during capturing, a buzzer sounds to notify you of the status.
Status
When SD CARD is replaced
When SD CARD replacement failed
SD CARD replacement is in standby
SD CARD replacement completed
SD CARD replacement error occurred
3-8
Pi
Pi Pi Pi
Pi Pi Pi
Bi Bi - - -
Bi Bi - - -
Pi Pi Pi Pi Pi Pi Pi Pi Pi
Pi (As a FUNCTION key sound)
Bi Bi - - -
Pi - - - Pi - - - Pi - - -
Pi Pi Pi
Bi - - - (about 3 seconds) Pi Pi Pi
Description
Description
Description
Description