GRAPHTEC GLT400 User Manual page 83

<Procedure>
1. Open the Web browser.
2. Type in the URL (http://IP address/Index.html) in the address input field.
If the basic authentication is set to On, you need to enter the user name and password you set.
(Both user name and password is "GLT400" by default.)
3. The following screen is displayed.
(1) (2) (3)
Selection Item
(1) Data
(2) Status
(3) GLT400 operation
(4) Download
(5) Home page
(4) (5)
Waveform display and digital display are possible.
The device name and capturing status can be checked.
Capturing start/stop and simple control can be performed.
Using the FTP function, the data captured by the GLT400 can be downloaded to the PC.
(This function may not be available due to restrictions on the web browser.)
Link to our Home page.
CHAPTER 3 Operation and Function
Description
3-23