GRAPHTEC GLT400 User Manual page 79

REMOTE mode
The GLT400 becomes the wireless LAN remote unit and the GL840 becomes the wireless LAN base unit.
* Please prepare the following for GL840 in advance.
• Connect wireless LAN unit B-568 (option)
• Access point mode setting
• Set Easy Setting (WPS) to Push button
If it is not completed properly, review the wireless environment such as communication distance and try
again.
Free running
(capturing stopped)
Press the Easy Setup (WPS) push
button on the GL840
Press and hold the [FUNCTION] key
Easy Connection (WPS) is in progress
Easy Connection (WPS) was
successful
IP address automatic acquisition
Easy Connection (WPS) failed
Pi Pi Pi
Bi - Bi - - -
CHAPTER 3 Operation and Function
3-19