GRAPHTEC GLT400 User Manual page 130

CHAPTER 4 Settings and Measurement
FTP Server Settings
Set the settings to make the GLT400 function as an FTP server.
If you want to connect with FTP over TLS with your own digital signature certificate/encryption certificate,
please contact us.
(6)
(1) Anonymous access
(2) User name
(3) Password
(4) Port Number
(5) Encryption method
(6) Apply settings
When your own digital signature certificate has not been installed, a self-signed certificate is output.
Please use it after acknowledging.
4-40
(1)
(2)
(3)
(4)
(5)
Set whether to allow anonymous access.
Disable: Anonymous access is not allowed.
Enable: Anonymous access is allowed.
Enter the user name of the FTP account. (up to 31 characters)
User name is "GLT400" by default.
Enter the password of the FTP account. (up to 31 characters)
Password is "GLT400" by default.
Enter the port number used for the FTP.
Usually the port number is 21. (0 to 65535)
The data sent and received is encrypted in the FTP server.
Off:
Off/ Explicit encryption (Explicit): Explicit mode. Encryption is started after the connection.
Explicit encryption (Explicit):
Implicit encryption (Implicit):
The settings are applied to the GLT400.
Description
Not encrypted.
If encryption is not activated, connect with encryption Off.
Explicit mode. Encryption is started after the connection.
Implicit mode. Encrypted communication is performed from the
time when connected.