Table of Contents
Advertisement
CHAPTER 1 General Description
Configuration When in Use
Do not use the GLT400 standing upright or at an angle. It must always be laid flat or inclined on the stands.
<Usage Configuration>
* To install vertically, use the DIN rail jig for GL840 expansion terminal (B-540: option).
Do not block the air vent on the GLT400, as this will cause malfunctioning.
Measurement accuracy may not be satisfactory if the system is used in a condition other than described
above.
1-4
Advertisement
Table of Contents
Need help?
Do you have a question about the GLT400 and is the answer not in the manual?