Pioneer PE6000 Series User Manual page 196

Appendix A
Output control communication address
AO1
AO2
FMP
Parameter initialization
This function is needed when host computer need to have parameter initialization of AC drive.
If PP-00(User password) is not zero, then password should be verified at first. After it is done,
host computer can have parameter initialization within 30 seconds.
The communication address of password verification is 1F00H. The password verification can
be finished when directly write correct password in the address.
The communication address of parameter initialization is 1F01H. The definition is as below:
parameter initialization communication
2002H
2003H
2004H
address
1F01H
196
PE6000 User Manual
Command contents
0~7FFF represents 0%~100%
Command functions
1:restore factory default
2:record information
4: restore user backup
parameter
501:backup current parameter