Pioneer PE6000 Series User Manual page 111

PE6000 User Manual
Function
Code
P4-18
Corresponding setting of AI curve 2
P4-19
P4-20
Corresponding setting of AI curve 2
P4-21
P4-22
The method of AI3 functions is similar to that of setting AI1 function.
Function
Code
P4-28
Corresponding setting of pulse
P4-29
P4-30
Corresponding setting of pulse
P4-31
P4-32
These parameters are used to set the relationship between DI5 pulse frequency and
corresponding settings. The pulses can only be input by DI5. The method of setting this function is
similar to that of setting AI1 function.
Function
Parameter Name
Code
P4-33 AI curve selection
The unit's digit, ten's digit and hundred's digit of this parameter are respectively used to select
Parameter Name
AI curve 2 minimum input
minimum input
AI curve 2 maximum input
maximum input
AI2 filter time
Parameter Name
Pulse minimum input
minimum input
Pulse maximum input
maximum input
Pulse filter time
Unit's digit (AI1 curve selection)
Curve 1 (2 points, see P4-13 to P4-16)
Curve 2 (2 points, see P4-18 to P4-21)
Curve 3 (2 points, see P4-23 to P4-26)
Curve 4 (4 points, see A6-00 to A6-07)
Curve 5 (4 points, see A6-08 to A6-15)
Ten's digit (AI2 curve selection)
Curve 1 to curve 5 (same as AI1)
Hundred's digit (AI3 curve selection)
Reserved
Setting Range
0.00 V to P4-20
-100.00%–100.0%
P4-18 to 10.00 V
-100.00%–100.0%
0.00–10.00s
Setting Range
0.00 kHz to P4-30
-100.00%–100.0%
P4-28 to 50.00 kHz
-100.00%–100.0%
0.00–10.00s
Setting Range
111
Description of Function Codes
Default
0.00 V
10.00 V
100.0%
Default
0.00 kHz
0.0%
50.00 kHz
100.0%
0.10s
Default
0.0%
0.10s
321