Pioneer PE6000 Series User Manual page 108

Description of Function Codes
Figure 5-8 Setting of three-line mode 1
As shown in the preceding figure, if SB1 is ON, the AC drive instructs forward rotation when
SB2 is pressed to be ON and instructs reverse rotation when SB3 is pressed to be ON. The AC
drives stops immediately after SB1 becomes OFF. During normal startup and running, SB1 must
remain ON. The AC drive's running state is determined by the final actions on SB1, SB2 and SB3.
3: Three-line mode 2
•
In this mode, DI3 is RUN enabled terminal. The RUN command is given by DI1 and the
direction is decided by DI2. The parameters are set as below:
Function
Code
P4-11
P4-00
P4-01
P4-02
Parameter Name
Terminal command mode
DI1 function selection
DI2 function selection
DI3 function selection
PE6000
Value
2
1
2 Forward or reverse direction
3
108
PE6000 User Manual
Function Description
Three-line 2
RUN enabled
Three-line control