PE6000 User Manual
Function
Code
P4-38
DI valid mode selection 1
Group P5: Output Terminals
The PE6000 provides an analog output (AO) terminal, a digital output (DO) terminal, a relay
terminal and a FM terminal (used for high-speed pulse output or open-collector switch signal
output) as standard. If these output terminals cannot satisfy requirements, use an optional I/O
extension card that provides an AO terminal (AO2), a relay terminal (relay 2) and a DO terminal
(DO2).
Function
Code
P5-00
FM terminal output mode
The FM terminal is programmable multiplexing terminal. It can be used for high-speed pulse
output (FMP), with maximum frequency of 100 kHz. Refer to P5-06 for relevant functions of FMP. It
can also be used as open collector switch signal output (FMR)
Function
Code
P5-01
FMR function (open-collector output terminal)
P5-02
Relay function (T/A-T/B-T/C)
P5-04
DO1 function selection (open-collector output terminal)
Parameter Name
Parameter Name
Parameter Name
Setting Range
Unit's digit (DI1 valid mode)
0: High level valid
1: Low level valid
Ten's digit (DI2 valid mode)
0, 1 (same as DI1)
Hundred's digit (DI3 valid mode)
0, 1 (same as DI1)
Thousand's digit (DI4 valid mode)
0, 1 (same as DI1)
Ten thousand's digit (DI5 valid mode)
0, 1 (same as DI1)
Setting Range
0: Pulse output (FMP)
1: Switch signal output (FMR)
113
Description of Function Codes
Default
Default
Default
00000
0
0
2
1
Need help?
Do you have a question about the PE6000 Series and is the answer not in the manual?
Questions and answers
Je veux savoir ce que signifie err14
Error code ERR14 for the Pioneer PE6000 Series indicates an overheating issue. Possible causes include a damaged thermally sensitive resistor or a damaged inverter module. The solutions are to replace the damaged thermally sensitive resistor or replace the inverter module.
This answer is automatically generated