PE6000 User Manual
3 Operation, Display and Application Examples
3.1 Operation and Display Panel
You can modify the parameters, monitor the working status and start or stop the PE6000 by
operating the operation panel, as shown in the following figure.
Figure 3-1 operation panel
Command source indicator
ON: local control (Local)
OFF: Operation panel control
Blinking: Remote control (Remote)
Running indicator
Data display
Programming key
Speed-control
potentiometer
Multifunctional
key
RUN key
1)
Description of Indicators
l
RUN: ON indicates that the AC drive is in the running state, and OFF indicates that the AC
drive is in the stop state.
l
LOCAL/REMOT: It indicates whether the AC drive is operated by means of operation panel,
terminals or communication.
LOCAL/REMOT: OFF
LOCAL/REMOT: ON
LOCAL/REMOT: blinking
l
FWD/REV: ON indicates reverse rotation, and OFF indicates forward rotation.
l
TUNE/TC: When the indicator is ON, it indicates torque control mode. When the indicator is
blinking slowly, it indicates the auto-tuning state. When the indicator is blinking quickly, it
indicates the fault state.
2) Unit Indicators
Forward /Reverse
Command source indicator
rotation indicator
ON: reverse rotation
ON: local control (Local)
OFF: forward rotation
OFF: Operation panel control
Blinking: Remote control (Remote)
Tuning/Fault indicator
Running indicator
Data display
Unit indicator
Confirm key
Programming key
Shift key
Increment/
Quick key
Decrement key
RUN key
Stop/Reset key
Operation panel control
Terminal control
Communication control
15
Operation, Display and Application Examples
Forward /Reverse
rotation indicator
ON: reverse rotation
OFF: forward rotation
Tuning/Fault indicator
Unit indicator
Shift key
Multifunctional key
Stop/Reset key
Need help?
Do you have a question about the PE6000 Series and is the answer not in the manual?
Questions and answers
Je veux savoir ce que signifie err14
Error code ERR14 for the Pioneer PE6000 Series indicates an overheating issue. Possible causes include a damaged thermally sensitive resistor or a damaged inverter module. The solutions are to replace the damaged thermally sensitive resistor or replace the inverter module.
This answer is automatically generated