Pioneer PE6000 Series User Manual page 180

Description of Function Codes
U0-00 Running frequency
U0-01
These two parameters display the absolute value of theoretical running frequency and set
frequency. For the actual output frequency of the AC drive, see U0-19.
U0-02
It displays the AC drive's bus voltage.
U0-03
It displays the AC drive's output voltage in the running state.
U0-04
It displays the AC drive's output current in the running state.
U0-05
It displays the AC drive's output power in the running state.
U0-06
It displays the AC drive's output torque in the running state.
U0-07
It displays the current state of DI terminals. After the value is converted into a binary number,
each bit corresponds to a DI. "1" indicates high level signal, and "0" indicates low level signal. The
corresponding relationship between bits and DIs is described in the following table.
Set frequency
Bus voltage
Output voltage
Output current
Output power
Output torque
DI state
Display Range
Display Range
Display Range
0.00–655.35 A (AC drive power ≤
Display Range 55 kW) 0.0–6553.5 A (AC drive
0.00–3200.0 Hz (P0-22 = 1)
Display Range
0.00–3200.0 Hz (P0-22 = 1)
Display Range
0.00–3200.0 Hz (P0-22 = 1)
Display Range
180
PE6000 User Manual
0.00–320.00 Hz (P0-22 = 2)
0.00–3200.0 Hz (P0-22 = 1)
0.0–3000.0 V
0.00–3200.0 Hz (P0-22 = 1)
0–1140 V
0.00–3200.0 Hz (P0-22 = 1)
power > 55 kW)
0–32767
-200.0%–200.0%
0–32767
0.00–3200.0 Hz (P0-22 = 1)