Pioneer PE6000 Series User Manual page 135

PE6000 User Manual
Frequency switchover point
between acceleration time 1
P8-25
and acceleration time 2
Frequency switchover point
between deceleration time 1
P8-26
and deceleration time 2
This function is valid when motor 1 is selected and acceleration/deceleration time switchover is
not performed by means of DI terminal. It is used to select different groups of acceleration/
deceleration time based on the running frequency range rather than DI terminal during the running
process of the AC drive.
Figure 5-19 Acceleration/deceleration time switchover
Setting Range
Setting Range
Default
0.00 Hz to maximum frequency
Default
0.00 Hz to maximum frequency
135
Description of Function Codes
0.00 Hz
0.00Hz