Large Com Port Data Throughput; Ntrip Configuration; Ntrip System - Novatel OEM6 Series User Manual

Ethernet Configuration
6.5

Large COM Port Data Throughput

For high data rate Ethernet logging using TCP/IP, disable Windows Delayed Ack Algorithm (DAA) for
complete data logging. If you do not disable DAA, there will be data gaps due to the Windows Ethernet
buffer.

If done incorrectly, changing the Windows Registry may impair the operation of the
computer. Editing the Windows Registry is for advanced Microsoft Windows users
only. NovAtel Inc. is not able to provide any technical support for any actions taken
regarding information found in Microsoft's Knowledge Base.
Windows XP (SP3) and Windows Server 2003:
http://support.microsoft.com/kb/328890
http://support.microsoft.com/kb/815230
6.6

NTRIP Configuration

Network Transport of RTCM via Internet Protocol (NTRIP) is an application protocol used to stream
GNSS differential correction data over the internet.
An OEM6 receiver can be configured as either an NTRIP server or an NTRIP client. For more information
about NovAtel's NTRIP, refer to www.novatel.com/products/firmware-options/ntrip/.
The NTRIP caster is an HTTP internet service that acts as a communication medium between NTRIP
servers and NTRIP clients. The NTRIP caster is provided by third party sources. For a full list of NTRIP
casters, refer to the following link: http://www.rtcm-ntrip.org/home.
OEM6 Family Installation and Operation User Manual Rev 7
Figure 34: NTRIP System
Chapter 6
83