Using The Winload Utility; Winload's Open Window; Open File In Winload; Com Port Setup - Novatel ProPak6 User Manual

Chapter 7
7.3.2

Using the WinLoad Utility

If opening WinLoad for the first time, ensure the file and communications settings are correct.
Open a File to Download
Select File |Open. Navigate to the file to open (Figure 30).
When a file is selected, the
(Figure 31).
Communications Settings
To set the communications port and baud rate, select Settings | COM Settings. Choose the computer port
to use from the Com Port drop down list and the baud rate from the Download Baudrate drop down list.
Set the baud rate as high as possible (the default of 115200 is preferred if a higher baud rate is not
available).
ProPak6 Installation and Operation User Manual Rev 4
Figure 30: WinLoad's Open Window
filename appears in the main WinLoad display area and in the title bar
Figure 31: Open File in WinLoad
Figure 32: COM Port Setup
NovAtel Firmware and Software
98