Large Ethernet Port Data Throughput; Ntrip Configuration - Novatel SMART7 Installation And Operation Manual

Chapter 6 Ethernet Configuration
LOG ICOM1 RTCAREF ONTIME 10
LOG ICOM1 RTCA1 ONTIME 5
SAVECONFIG
Rover:
ICOMCONFIG ICOM1 TCP <base ip address>:<base port #>
INTERFACEMODE ICOM1 RTCA NONE OFF
LOG BESTPOSA ONTIME 1 (optional)
SAVECONFIG
Use the BESTPOS log to confirm that the OEM7 rover is in RTK mode.

6.5 Large Ethernet Port Data Throughput

For high data rate Ethernet logging using TCP/IP, disable Windows Delayed Ack Algorithm (DAA)
for complete data logging. If you do not disable DAA, there will be data gaps due to the Windows
Ethernet buffer.
If done incorrectly, changing the Windows Registry may impair the operation of the
computer. Editing the Windows Registry is for advanced Microsoft Windows users
only. NovAtel Inc. is not able to provide any technical support for any actions taken
regarding information found in Microsoft's Knowledge Base.

6.6 NTRIP Configuration

An OEM7 receiver can be configured as either an NTRIP server or an NTRIP client. For more
information about NovAtel's NTRIP, refer to
s/ntrip/.
SMART7 Installation and Operation User Manual 0C
www.novatel.com/products/firmware-option-
96