The 120 Ω termination resistor (R231 and R236) should only be used when the CAN device is used at
one end of the CAN bus. Multiple terminations along the length of the CAN bus will degrade performance
for all CAN devices on that bus.
Designator
FB204, FB207,
FB215, FB218
D220, D225
166
Figure 82: Example - CAN Protection and Filtering Circuit
Table 40: Bill of Materials (critical components)
Manufacturer
TDK
NXP Semiconductor PESD1CAN,215
OEM6 Family Installation and Operation User Manual Rev 7
Manufacturer Part Number
MMZ1608S800A