Notices
Acceptable choices for earth grounds, for central buildings, are:
•
Grounded interior metal cold water pipe within five feet (1.5 m) of the point where it
enters the building
•
Grounded metallic service raceway
•
Grounded electrical service equipment enclosure
•
Eight-foot grounding rod driven into the ground (only if bonded to the central
building ground by #6, or heavier, bonding wire)
These installation instructions are the minimum requirements for receiver and antenna installations. Where
applicable, follow the electrical codes for the country of installation. Examples of country codes include:
• USA
• Canada
• UK
Conventions
The following conventions are used in this manual:
Information that supplements or clarifies text.
A caution that actions, operation or configuration may lead to incorrect or improper use of
the hardware.
A warning that actions, operation or configuration may result in regulatory noncompliance,
safety issues or equipment damage.
Specific to the OEM615 card
615
Specific to the OEM617D card
617D
Specific to the OEM628 card
628
638
Specific to the OEM638 card
Specific to the FlexPak6 enclosure
FPk6
OEM6 Family Installation and Operation User Manual Rev 7
National Electrical Code (NFPA 70)
Canadian Electrical Code (CSA C22)
British Standards Institute (BSI 7671)
13