D.1.1.5
12 V Power Accessory Cable (NovAtel part number 01017663)
The power accessory cable supplied with the FlexPak6, see Figure 74, 12 V Power Accessory Cable on
Page 144, provides a convenient means for supplying +12 VDC. While the receiver is capable of
operating over a wider input voltage range, the accessory plug should not be used above +12 V. The
accessory plug includes a fuse. If the accessory plug is not used, the alternative wiring must also include
a fuse.
Input is provided through the standard 12 V power outlet. The output from the power adapter utilizes a 4-
pin LEMO connector (LEMO part number FGG.0B.304.CLAD52Z) and plugs directly into the power input
located on the front of the FlexPak6. This cable is RoHS compliant.
For alternate power sources, see "FlexPak6 Alternative Power Source" on Page 39.
Reference
Description
1
- (black)
2
+ (red)
3
+ (orange or green)
4
- (brown or white)
5
Connector Key Marking
144
Figure 74: 12 V Power Accessory Cable
Reference
6
7
8
9
10
OEM6 Family Installation and Operation User Manual Rev 7
Description
Accessory Plug
Ground (side tab)
Spring
6 A slow-blow fuse
+ Tip