A1 Front Frame Assembly - Agilent Technologies E4404B Installation Notes

A1 Front Frame Assembly

CAUTION Use ESD precautions when performing this replacement procedure.
1. Refer to Figure 3. Remove the two screws (1), on the bottom side of the instrument, that secure the front
frame to the RF assembly.
Figure 3 A1 Front Frame Assembly Removal
2. Place the instrument with the top side facing up and remove the remaining two screws (2) that secure the
front frame subpanel to the chassis.
3. Slide the front frame forward until it catches on the tabs on the sides of the chassis.
Installation Note E4404-90007
9