Scalance X101-1Aui Tp-Rj-45 Interface; Figure 3-2 Rj-45 Connector Pinout - Siemens SCALANCE X101-1AUI Commissioning Manual

Product Characteristics

3.5 SCALANCE X101-1AUI TP-RJ-45 Interface

3.5 SCALANCE X101-1AUI TP-RJ-45 Interface
Connector pinout
RJ-45 jack
Figure 3-2
Pin number Pinout
Pin 8
Pin 7
Pin 6
Pin 5
Pin 4
Pin 3
Pin 2
Pin 1
On SCALANCE X101-1AUI, the twisted pair port is implemented as RJ-45 jack.
Notice
TP cords or TP-XP cords with a maximum length of 10 m can be connected to the RJ-45 TP
port.
Depending on the cable type, a total cable length of up to 100 m is permitted between two
devices with the IE FC cables and IE FC RJ-45 plug 180.
Note
The transmission mode of Scalance X101-1AUI is set to 10 Mbps half duplex.
Devices not supporting autonegotiation must be set to 10 Mbps / half duplex.
3-4
RJ-45 connector pinout
NC
NC
TD-
NC
NC
TD+
RD-
RD+
Industrial Ethernet Media Converters SCALANCE X-100 Series
Commissioning Manual, 06/2006, A2B00051526A, Product Version 03